Motorcycle jack is a lifting device that is used to put motorcycle into elevated position for maintenance, repair and tire changes. A jack is inexpensive, at-home device that will make working on your bike safer as well as easier.
Steps for Lift a Motorcycle on jack
Here are some great Steps that can actually help you.
Finding a Flat Surface:
To properly lift a motorcycle, your vehicle must be present on a flat surface. It makes your work easy as well as unnecessary adjustments are not made, which ultimately saves time.
Inspect the Underside of the Bike:
Use your bike’s shop manual that will assist you in identifying a supportive, flat surface under the engine that will help lift the bike with the jack.
An uneven surface will lift your bike unevenly which will ultimately cause a bike to fall due to imbalance. If you wanna have Video tutorial watch this video to get the Guide.
If your motorcycle has a side stand, it may keep your bike from standing steadily so you need to put a wooden block underneath to make your bike straight as well as upright.
To do this, you need to take help from another person otherwise it is very difficult to make adjustments.
Use Ratcheting Tie-Down Straps:
A good safety measure for the people who are obsessed with their bikes should buy a pair of ratcheting tie-down straps.
These straps prevent your bike from falling during work. Ratcheting straps are very durable yet inexpensive product.
Place the Jack in Position:
Firstly, roll the floor jack under your motorcycle then vigilantly position the jack on the flat surface that you have located earlier.
If your bike has a center stand, make one thing very sure that the stand is placed in the center of two rubbers platform on the jack.
In case your bike is still not balanced you can use a piece of cloth to fill the gaps. Do not forget to lock tires of your bike.
Escalate the Jack:
Use the foot pedal to rise your bike steadily and evenly. If at any point you feel that the rise of the bike isn’t steady, lower the jack and make further adjustments and start over as slow and steady wins the race.
It’s a better idea to take your time and do it right rather than crashing your bike on the floor. It is important to make sure that you don’t raise the jack higher than what it is designed to do. Most of the jacks rise to 11.8, 14.5, and 16.5 inches above the floor.
- Most of the times things won’t fit on the jack so you have to make few adjustments by using wooden pieces by putting them in spaces of frame rails.
- Do not rush yourself, take your time to balance the bike.
- Automotive ramps are really helpful when your bike is on the jack